Spotted Gum 135 x 35mm hardwood decking - product photography

135x35 mm Spotted Gum Hardwood Decking

135 mm
excluding GST  $26.92 + GST total including GST $29.61 incl. GST per LM
Skip to product information
Spotted Gum 135 x 35mm hardwood decking - product photography

Images are for illustration purposes only. Timber is a natural material; colour, grain and appearance will vary between boards.

135x35 mm Spotted Gum Hardwood Decking

excluding GST  $26.92 + GST total including GST $29.61 incl. GST per LM
Taxes included.

Quantity below = linear metres. Random lengths are supplied. Preferred individual lengths can be requested by quote.

Width
Linear metres
1
Total LM
1.0 m
Subtotal (inc. GST)
$29.61

135x35 mm Spotted Gum is the heavy-duty board in our Spotted Gum decking family, supplied for commercial decks, wider joist spacings and high-load structures that call for substantially more section depth than the standard 19 mm profile while keeping the species' distinctive grain and colour. A 140x35 mm board is available at the same linear-metre rate; choose the width in the buy box.

Sold as QLD Class 1 Hardwood: the supplier specification sheet publishes Class 1 above-ground natural durability with a 40+ year service expectation. Spotted Gum is grown along the NSW and Queensland coast, with pale gold to warm brown colouring and the darker gum-vein flecking the species is named for. As a specialist profile it is less commonly shelf-stocked than the 19 mm boards, so availability and lead time are confirmed with our supplier at quote stage.

Sold per linear metre in random lengths. Preferred lengths, packs and bulk quantities are quoted against current supplier availability: add your linear metres to the cart, or request a quote for project volumes.

Timber calculator

Calculating for: 135x35 mm Spotted Gum Hardwood Decking

Calculator mode
Area to linear metres

Supplied in random lengths, so there is no length to choose: order the total linear metres you need.

Enter your measurements and select Calculate to see an estimate.

How this is calculated

Cover width (m) = (board width + gap) ÷ 1000

Linear metres required = area ÷ cover width

Linear metres with wastage = linear metres × (1 + wastage ÷ 100)

Reverse: estimated coverage area = linear metres × cover width

Estimates only. Confirm final quantities against your measured plans and the product's actual cover width before ordering.

Available sizes

Each size is its own product with its own pricing and stock. Selecting a size takes you to that product.

Specifications

Species Spotted Gum
Treatment Kiln Dried
Nominal dimensions 135 × 35 mm (140 × 35 mm option, same rate)
Supplied lengths Random lengths
Selling unit Per linear metre (LM)
Coverage width 139 mm

Need a different length, grade or quantity? Request a quote.

Guidance

Working with this timber

Technical profile

From the supplier specification sheet: Spotted Gum covers Corymbia citriodora, C. henryi and C. maculata. It carries a High seasoned strength rating (SD2) with density of 990 to 1180 kg/m3, is termite resistant, and is rated Class 1 above-ground durability with a 40+ year service expectation.

Applications

Decking, screening, cladding, flooring and exterior architectural work.

Installation

  • Store boards flat, fully supported and off the ground, and keep them dry before installation. Allow the timber to acclimatise at the site before fixing.
  • Fix with hot dipped galvanised or stainless steel screws, two per joist, pre-drilled and countersunk. Stainless steel fixings are recommended for coastal or poolside work.
  • Maintain ventilation gaps between boards and adequate ground clearance so the deck can dry out; the supplier installation guidelines under Documents and downloads set out clearances in detail.
  • Use sharp, quality cutting tools and seal cut ends with decking oil. Wear appropriate eye, ear and breathing protection when cutting.

Maintenance

  • Clean the surface before coating; an oxalic acid based timber cleaner removes dirt, grease and tannin stains.
  • Finish with a penetrating decking oil per the coating manufacturer's label, then re-coat on a regular cycle suited to exposure and traffic.
  • Monitor the coated timber for colour loss and dryness, and re-coat when it begins to look dry to maintain protection.

Delivery

Delivery is quoted per order based on load, length and access. See Delivery And Pickup for coverage areas.

Pickup

Pickup is available for confirmed orders; arrangements and location details are confirmed at order stage.

Documents and downloads

Product documents are added as they are confirmed with our suppliers.

Explore other hardwood species

Browse our other hardwood species. Available profiles and sizes vary by species.

Need more than listed?

Different lengths, grades or bulk quantities

  • Long-length and mixed-length orders
  • Pack and pallet pricing
  • Supply confirmed with our suppliers before you pay

Common questions

How is this timber sold?

This product is sold per linear metre (LM). See our LM and m² guide for how that works.

When will pricing and stock show?

Products go live as supplier pricing and availability are confirmed. Anything not yet live can be quoted.

Can I pick up?

Pickup is available for confirmed orders. Pickup arrangements are confirmed at order stage.

You may also like

Ready to price your project?

Send through your specifications and quantities and we will come back with a supply-backed quote.